The HOBO RX3000 is Onset’s next-generation remote data logging station that provides instant access to site-specific environmental data anywhere, anytime via the internet. The new station combines the flexibility and sensor quality of more expensive systems, an onboard LCD display, and the convenience of plug-and-play operation.
Environment:
The RX3000 Data Logger is for use in Indoor and Outdoor environments
The RX3000 Data Logger supports the following measurements (sensors sold separately):
To see the full specifications for this product, please see our product manual found under the documentation tab.
|
Operating Range |
-40° to 60°C (-40° to 140°F); no remote communications for battery voltage less than 3.9 V DC |
|
Smart Sensor Connectors |
10 |
|
Smart Sensor Network Cable Length |
100 m (328 ft) maximum |
|
Smart Sensor Data Channels |
Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details) |
|
Module Slots |
2 |
|
Logging Rate |
1 second (RX3001 and RX3002) or 1 minute (RX3003) to 18 hours |
|
Time Accuracy |
±8 seconds per month in 0° to 40°C (32°F to 104°F) range; |
|
Battery Type/Power Source |
4 Volt, 10 AHr, rechargeable sealed lead-acid; external power required using one of these options: AC power adapter (AC-U30), solar panel (SOLAR-xW), or external power source 5 V DC to 17 V DC with external DC power cable (CABLE-RX-PWR) |
|
Rechargeable Battery |
Typical 3–5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F); operation outside this range will reduce the battery service life |
|
Memory |
32 MB, 2 million measurements, continuous logging |
|
Alarm Notification Latency |
Logging interval plus 2–4 minutes, typical |
|
Enclosure Access |
Hinged door secured by two latches with eyelets for use with user-supplied padlocks |
|
LCD |
LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range |
|
Materials |
Outer enclosure: Polycarbonate/PBT blend with stainless steel hinge pins and brass inserts; Inner enclosure: Polycarbonate; Gaskets: Silicone rubber; Cable channel: EPDM rubber; Cable opening cover: Aluminum with ABS plastic thumb screws; U-Bolts: Steel with zinc dichromate finish |
|
Size |
18.6 x 18.1 x 11.8 cm (7.3 x 7.1 x 4.7 in.); see diagrams on next page |
|
Weight |
2.2 kg (4.85 lb) |
|
Mounting |
3.8 cm (1.5 inch) mast or wall mount |
|
Environmental Rating |
Weatherproof enclosure, NEMA 4X (requires proper installation of cable channel system) |
|
|
The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) |
|
|
Approved for use in the USA and Canada, see last page; contains FCC ID R68XPICOW, IC ID 3867A-XPICOW (RX3002) and FCC ID QIPEHS6, IC ID 7830A-EHS6 (RX3003) |
|
Wireless Radio |
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz, UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz |
|
Antenna |
Penta band |
|
Ethernet (RX3001) |
|
|
Connector |
One RJ45/100BaseT |
| Wi-Fi (RX3002) | |
|
Network Standards |
IEEE 802.11b/g/n |
|
Frequency Range |
2.412–2.484 GHz |
|
Antenna Connector |
1, no diversity supported |
Data Rates |
1, 2, 5.5, 11 Mbps (802.11b); 6, 9, 12, 18, 24, 36, 48, 54 Mbps (802.11g); 802.11n, HT20 MCS0 (6.5 Mbps) to HT20 MC87 (65 Mbps) |
|
Number of Selectable Radio Subchannels |
Up to 14 channels; profiles available will include USA, France, Japan, Spain, Canada, and “Other” (multiple countries) |
|
Radio Modulations |
OFDM, DSSS, DBPSK, DQPSK, CCK, 16QAM, 64QAM |
|
Security |
WEP 64/128, WPA-PSK, AES end-to-end encryption |
|
Maximum Receive Level |
-10 dBm (with PER <8%) |
|
Receiver Sensitivity |
-72 dBM for 54 Mbps, -87 dBm for 11 Mbps, -89 dBm for 5.5 Mbps, |
|
Cellular (RX3003) |
|
|
Wireless Radio |
GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz, UMTS/HSPA+: Five band 800/850/900/1900/2100 MHz |
|
Antenna |
Penta band |
Compatible Items
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
This option is chosen during U30 system configuration. Recommended as primary analog sensor input.
© 2015 Bakrona Zürich AG. All Rights Reserved.