The Veris AC Kilowatt Transducer incorporates three split-core AC current sensors and three voltage leads and outputs a signal proportional to kilowatts of power (demand). Because these sensors tie directly into the line, they should be used only by qualified personnel. |
| | |
Features and Specifications | |
| |
• | Includes 3 100 Amp Split-Core Current Transformers (CT) |
| |
• | Input primary voltage: 480 Volts AC rms |
| |
• | Accuracy: ±1% per ANSI (C12.1) (from 10 to 100% of CT rating) |
| |
• | Number of phases monitored: 3 |
| |
• | Frequency: 50/60 Hz |
| |
• | Internal isolation: 2000 VAC rms |
| |
• | Insulation class: 600 VAC rms |
| | |
• | Operating temp range: 0 to 60°C (32° to 140°F) |
| | |
• | Operating humidity range: 0 to 95% RH, non-condensing |
| | |
• | Output signal to FlexSmart: 4-20mA |
| | |
• | Supply powered (current loop): 9-30 VDC, 30mA max |
| | |
• | Current transformer: 100 Amp AC |
| | |
• | Opening dimensions: 3.8cm x 3.2cm (1.5 x 1.25) |
| | |
• | Dimensions of each CT: 10.7cm x 12.1cm x 2.9cm (4.2” x 4.75” x 1.13”) |
| | |
• | Requires FlexSmart Analog Module (S-FS-CVIA) |
| | |
• | # data channels: 1 | |