These differential air pressure sensors by Setra can be used for static or differential pressure in air or non-conducting gases. These sensors are fully protected against reverse wiring and against over-pressure to 10psi. |
| | |
Features and Specifications | |
| |
• | Measurement ranges: 0.25”, 1”, 2.5”, 5”, 10”WC |
| |
• | Accuracy (RSS): ±1% FS
(Root Sum Squares of Non-Linearity, Non-Repeatability, Hysteresis) |
| |
• | Compensated temp range: -18° to 65°C (0 to 150°F) |
| |
• | Over pressure: 10 psi |
| |
• | Operating temp range: -18° to 65°C (0 to 150°F) |
| |
• | Connection: screw terminal strip |
| |
• | Pressure fittings: 1/4” fitting |
| | |
• | Circuit: 3-wire | |
| | |
• | Excitation power: 9 to 30 VDC | |
| | |
• | Output to FlexSmart module: 0-5 VDC |
| | |
• | Output impedance: 100 Ohms | |
| | |
• | Pressure media: typically air or similar non-conducting gases | |
| | |
• | Case materials: fire retardant glass filled polyester | |
| | |
• | Dimensions: 8.9 cm x 5.1 cm x 4.1 cm (3.5 x 2.0 x 1.6) | |
| | |
• | Weight: 95 g (3.35 oz) | |
| | |
• | Requires FlexSmart Analog Module (S-FS-CVIA) | |
| | |
• | # data channels: 1 | |